Garage Door Insulation Kit

Reflective Insulation for Garage Doors

Garage Door Reflective Insulation

Fi-Foil’s Garage Door Insulation System is the perfect way to insulate new and existing garage doors. This system is easy to install and consists of Fi-Foil’s RBI Shield and a super adhesive double sided tape. RBI Shield is available in white or aluminum. The encapsulated air cells serve as an effective
thermal break, while the outer layer(s) of metalized film reflect up to 97% of all radiant energy. Fi-Foil’s Garage Door Insulation System keeps your garage cooler in the summer and warmer in the winter.

Features and Benefits

  • Superior thermal performance
  • Reflect 97% of radiant heat
  • Neat, clean appearance
  • No itchy fibers 
  • Improved Comfort 
  • Class A fire rating

Supporting Documents

Gallery

Product Key Specs

Width of Roll Coverage sq. ft.
24” 250

Product Test Data

Test Method Description Results
ASTM E-96 Water Vapor Permeance 0
ASTM D-3310 Corrosiveness No Evidence of Cracking or Pitting
ASTM C-1224-03, Section 9.5.2.4 Pliability No Evidence of Cracking or Pitting
ASTM C-1224-03, Section 9.5.1.4 Bleeding & Delamination No Evidence of Bleeding or Delamination
ASTM E408-71 (2002) Thermal Performance Emmisivity 0.03
Reflectivity 97%
Service Temperature 50 degrees F to 180 degrees F
ASTM E-84 / 2599 Flammability Class A
ASTM C-1338 Mold & Mildew Pass
Single Bubble Double Bubble
Reflective / Reflective Flame Spread 0 0
Smoke Development <50 <50
Reflective / Poly Flame Spread 0 0
Smoke Development <50 <50
ASTM D 638-01 Tensile Strength MD 33.0 lb/in 38.9 lb/in
Tensile Strength TD 21.4 lb/in 27.6 lb/in
Tear Strength MD 2.6 lbf 6.9 lbf
Tear Strength TD 3.2 lbf 7.3 lbf
Compression Strength 57.3 lbf 279 lbf
Get Started Today!

Insulate your garage doors for energy savings! 

Get information about a wide variety of applications

800-448-3401

Compliance and Approvals: 

Meets ASTM C-1224-03 STANDARD SPECIFICATION OF REFLECTIVE INSULATION

FAQ's

A water vapor retarder may or may not be part of the design depending on the climate zone and the other building components used in that particular section of the building envelope. If air containing water vapor is allowed to come in contact with a cold surface, then condensation will likely occur. Water vapor transmission can also occur even if the building envelope is air sealed or has an effective and properly installed air barrier.  Some insulation systems should include a water vapor retarder and some should allow vapor transmission.  Building codes and climate zones generally dictate the use of a water vapor retarder -- in short, the envelope is a system and the use should be carefully considered by the building designer.

 

Yes. The ASHRAE Handbook values are a subset of data from the National Bureau of Standards (NBS).

The Company We Keep

NAHB logo
ICAA logo
RIMA-I
International Association of Plumbing and Mechanical Officials
Spray Polyurethane Form Alliance
Florida Green Building Coalition
South Face