Metal Building Insulation System for Retrofit & New Construction
RetroShield® is a revolutionary system developed for the metal building industry. Attractive, high performing and remarkably easy to install, RetroShield® is ideal for retrofitting and upgrading insulation systems in new and existing metal buildings. Patented Clip & Pin components provide an extraordinary one-pass installation that can dramatically reduce or eliminate down-time for the operation or building owner.
Our patented Clip & Pin components offer a mechanical attachment to the building frame without bands or other support mechanisms required by other systems on the market.
Fast Facts about Fi-Foil’s RetroShield® System
Improves thermal performance - Saves energy
Quick and easy installation
Works with all types of metal framing
Attractive finished appearance (white or reflective)
Strong mechanical connection without glue or support cables
- Does not absorb moisture like standard mass insulation
One-Step Installation Process
Installing the RetroShield® System is a simple process that greatly reduces expensive labor costs. The Clip & Pin components easily attach to the lip of the purlin to secure the reflective insulation. Since the system is mechanically attached to the building’s frame without glue or cables, no additional framing or other alterations are needed to complete the retrofit process. This ensures long-term stability and performance and provides an appearance that can be used as the finished ceiling.
Superior Thermal Performance
RetroShield® offers maximum energy efficiency for any roof or wall retrofit application. When installed, the system can reduce radiant heat transfer by over 90%. This reflective insulation technology provides high reflectivity and low emissivity for superior thermal performance. The RetroShield® System offers continuous insulation and can be back-loaded with additional mass insulation for specific thermal performance or R-value requirements.
Our team is ready to consult with you. Contact us today to learn more about the RetroShield® System for your metal building.
Product Key Specs
|Width of roll||*54”||66”||72”||*96”|
|Double Bubble Roll Diameter||24”||24”||24”||24”|
|Roll Lineal Footage||125’||125’||125’||125’|
|*Available as custom order only|
Product Test Data
|ASTM E-96||Water Vapor Permeance||0.000|
|ASTM D-3310||Corrosiveness||No Evidence of Cracking or Pitting|
|ASTM C-1224-03||Section 22.214.171.124||Pliability||No Evidence of Cracking or Pitting|
|ASTM C-1224-03||Section 126.96.36.199||Bleeding & Delamination||No Evidence of Bleeding or Delamination|
|ASTM E408-71 (2002)||Thermal Performance||Emmisivity||0.06|
|Service Temperature||50 degrees F to 180 degrees F|
|ASTM E-84 / 2599||Flammability||Class A|
|ASTM C-1338||Mold & Mildew||Pass|
|Reflective / Reflective||Flame Spread||0|
|Reflective / Poly||Flame Spread||0|
|ASTM D 638-01||Tensile Strength MD||38.9 lb/in|
|Tensile Strength TD||27.6 lb/in|
|Tear Strength MD||6.9 lbf|
|Tear Strength TD||7.3 lbf|
|Compression Strength||279 lbf|