Davenport Middle School
Project Solution Commercial building code requires Class A rated facing on insulation installed above suspended ceilings. To lower costs, BMK Architects specified FI-FOIL FSK Shield™, as Class A rated facing, with unfaced batt insulation. This hybrid system saved approximately 20% over factory-laminated FSK-faced batts. To allow access [...]
Porsche Design Tower
Project Solution The Porsche Design Tower project broke ground in April of 2013 on 2.2 acres of beautiful beachfront land at Collins Ave. in Sunny Isles Beach. The FI-FOIL team began working with Sieger Suarez Architects in January 2014 to discuss the advantages of VR Plus [...]
Horizon Bay at Hyde Park; Tampa, FL
Project Solution Gables Construction had an R-5.0 masonry wall insulation specification requirement and needed to reduce the cost of the project. Project Solution: C Q Insulation has used FI-FOIL AA2 Vapor Shield™ on several other commercial projects, and knew it was the right product for Horizon [...]
The Slade at Channelside; Tampa, FL
Project Solution The mixed-use development includes 2 buildings, 8-story and 280 condo units (780 to 1,539 Sq Ft). The Slade is ideally situated in the Channelside District, the location adjacent to Tampa’s port and downtown business district, and is the epitome of convenience. It provides Tampa [...]
The Symphony North & South Towers; Fort Lauderdale, FL
Project Solution Suffolk Construction was brought in to finish the project due to several issues with the original general contractor, and their first challenge was to collaborate with the owner’s representative and project’s design team to bring the project back within budget. One of the products [...]
Insulating Efficiently in Florida’s Public Schools
Project Solution Polk County Public Schools, Bartow, Florida needed a way to meet Florida Building Codes and install the batt insulation above their drop-in acoustical ceiling tiles so it would be easier to repair and replace ceiling tiles, work on lighting and electrical issues, etc., without [...]
Bok Tower Gardens
Project Solution Product Application: The FSK Shield™ Class A, fire-rated, aluminum facing changes the air film coefficient to low-e (emittance). It's an insulated roof deck (see images 1 and 4). According to the ASHRAE Handbook Tables, this application adds an R-4.6 to the insulation system. [...]
Winter Haven High School
Project Solution Commercial building code requires Class A rated facing on insulation installed above suspended ceilings. Project Solution: FSK-faced batt insulation was too expensive, so the architect specified FI-FOIL FSK Shield™ as Class A rated facing, with unfaced batt insulation. To allow access to the mechanical [...]
Cornerstone Custom Home Rice; Lake Loop, Longwood, FL
Project Solution Unframed barrier walls that needed a Class A fire-rated material, which spray foam could adhere to, and that could span large areas without stretching. Project Solution: FI-FOIL FSK Shield™ has two facings - a low-emittance foil layer and a Kraft paper layer. When the [...]
Freshman Academy at Haines City High School
Project Solution Polk County School Board has included FI-FOIL FSK Shield™ as part of their building standard for several years now, and it continues to provide them with a lower cost option to FSK-faced Batt Insulation. A durable support system for the batt insulation is needed [...]
