Project Profiles

Project Information:

Project Location: 18555 Collins Ave. Sunny Isles Beach, FL 33160

Developer: Dezer Development, New York, NY

Architect: Sieger Suarez Architects, Miami, FL

General Contractor: Coastal Construction, Miami, FL

Drywall Contractor: Zarrella Construction Inc., Davie, FL

Supplier: G Proulx Building Materials, Fort Lauderdale, FL

Size of Building: 2.2 acres of beachfront land; 58-story luxury tower with 132 units - 3,800 to 9,500 sq. ft. 

Date Completed: Project will be completed in early 2016

Flash and Foil on frame walls
Project Information:

Builder: Sam O’Connor Builder Inc., Spring Hill, FL 

Insulation Contractor: Gale Insulation of Hernando, Brooksville, FL 

Applications: Wall Hybrid System: Flash & FOIL® with Fi-Foil’s VR Plus Shield Hi-Perm reflective insulation (3,000sf) and 2”of Comfort Foam Closed Cell Spray Foam. 

Roof Hybrid Insulation System with Fi-Foil’s Silver Shield Radiant Barrier (3,000sf) on roof trusses, over Comfort Foam Closed Cell Spray Foam.

The Problem

An option for insulating his frame wall home that provided high energy efficiency at a reduced cost vs. filling the cavity with foam.

VR plus reflective insulation
Project Information:

General Contractor: Cotter Ryan Construction, Longwood, FL

Insulation Contractor: C Q Insulation, Tampa, FL

Product Application: VR Plus Shield™Hi-Perm [20,000sf facility]

Completion Date: August 2010

The Problem

Achieving the highest R-Value and lowest cost masonry wall insulation, using 1-5/8” metal
framing

VR Plus on masonry
Project Information:

Builder: M/I Homes, Tampa, FL 

Insulation Contractor: Gale Insulation, Oldsmar, FL 

Product Application: VR Plus Shield™ Hi-Perm Reflective Insulation [Average 2,500 square feet per home] 

Completion Date: July 2010

The Problem

M/I Homes wanted to improve the energy efficiency of their homes to qualify for Energy Star.

VR Plus Shield Project
Project Information:

Construction Manager: Master Builders of South FL (Fort Lauderdale, FL)

General Contractor: Moss & Associates (Fort Lauderdale, FL)

Architect: JMWA (Boca Raton, FL)

Insulation Contractor: MGM Drywall (Miami, FL)

Product Application: VR Plus Shield™ installed as exterior mass wall insulation, over 7/8” metal hat channel. [Over 160,000sf]

Completion Date: August 2008

VR Plus
Project Information:

Developer: Greenfield Group, Boca Raton, FL

General Contractor: Leighton McGinn, Palm Beach Gardens, FL

Insulation/Drywall Contractor: Eurotech, Inc., Port St Lucie, FL

Application: VR Plus Shield Hi-Perm installed as Exterior Masonry Wall Insulation. [155,000sf building]

Completion Date: Septermber 2009

Reflective Insulation
Project Information:

Owner/Developer: Verizon Wireless (Boca Raton)

General Contractor: Duffey Construction Co., Inc. (Miami)

Architect: Elias AIA Architecture (Miami)

Insulation Contractor: Lotspeich Co. of FL, Inc. (Fort Lauderdale)

Product Application: VR Plus Shield™ Hi-Perm with tape tab was installed as exterior mass wall insulation, over 1-5/8” metal framing.

Completion Date: August 200920,000 Sq Ft

Project Information:

Benchmark Development, Frisco, Texas is a Developer and General Contractor specializing in the construction of hotels and motels. This particular hotel project – Comfort Suites, Fort Myers, FL, had walls constructed of concrete masonry units and furred out with 1-5/8” metal framing. The initial specification called for 1-1/2” foam board insulation to be cut between the metal framing. This product and installation method was going to be costly and time consuming. Thank-fully, their insulation contractor offered them a cost-saving alternative.

Hy-Fi hybrid insulation system
Project Information:

Builder - Robert Lord Builders

Installer - Alpine

Insulation Flash & FOIL® Hybrid System

Fi-Foil Product - VR Plus Shield Hi-Perm Version

Sprayfoam - BASF® R-6.8 per inch

Framing - 2” x 4” spaced 16” on center

House - 2 Story

6,000 SQFT of Flash & FOIL® installed

Project Information:

 Commercial Building

 4,000 SQ FT

 6,800 SQ FT of Wall Area

 Goal: High Energy Efficiency

Catalyst Software Company in Atlanta, GA was in the process of building a new company headquarters and wanted the best performing insulation system. To achieve this goal, they asked their insulation contractor to double check the specifications of the building’s architect. After looking through the specifications, they found that a flash and batt technique was to be used in the 6800 sq. ft., 2”x6” wall cavities.

• 1/2” Closed Cell Spay Foam Insulation

• Kraft Faced Fiberglass Batt R-13

Fi-Foil serves multi-family
Project Information:

Kosene and Kosene Residential, a real estate development company based in Indianapolis, IN, teamed up with architect Wakefield Beasley & Associates in Jacksonville to develop The Residences at Coconut Point - a condominium complex in Bonita Springs, Florida featuring 199 luxury residential units. While concrete masonry structures are relatively inexpensive to heat and cool, choosing the right insulation was key to both energy- and cost-efficiency. 

Project Information:

Project Location: 18555 Collins Ave. Sunny Isles Beach, FL 33160

Developer: Dezer Development, New York, NY

Architect: Sieger Suarez Architects, Miami, FL

General Contractor: Coastal Construction, Miami, FL

Drywall Contractor: Zarrella Construction Inc., Davie, FL

Supplier: G Proulx Building Materials, Fort Lauderdale, FL

Size of Building: 2.2 acres of beachfront land; 58-story luxury tower with 132 units - 3,800 to 9,500 sq. ft. 

Date Completed: Project will be completed in early 2016

AA2 Vapor Shield
Project Information:

General Contractor: Gables Construction Inc, Boca Raton, FL

Insulation Contractor: C. Q. Insulation, Inc., Tampa, FL

Product Application: AA2 Vapor Shield™ Hi-Perm [62,000sf installed]

Completion Date: January 2011

The Problem:

Gables Construction had an R-5.0 masonry wall insulation specification requirement and needed to reduce the cost of the project.

Tampa AA2 Vapor Shield
Project Information:

Owner/Developer: Cobalt Development Group (Miami) 

General Contractor: Case Contracting Co (Plant City) 

Architect: Cohen Freedman Encinosa & Assoc (Miami Lakes) 

Insulation Contractor: M&R Drywall Svcs (Pompano Beach) 

Application: AA2 Vapor Shield™ Hi-Perm installed as mass wall insulation. Total of 150,000 Sq Ft 

Completion Date: December 2008 

AA2 Vapor Shield
Project Information:

General Contractor: Suffolk Construction (West Palm Beach)

Architect: Cohen, Freedman, Encinosa & Assoc (Miami Lakes)

Insulation Contractor: Skyline Systems, Inc. (Miami)

Application: AA2 Vapor Shield™ Hi-Perm reflective insulation installed as exterior mass insulation.

Completion Date: 2006

2 Buildings, 22-story, 338 units

Silver Shield Radiant Barrier Project Profile
Project Information:

Owner: Housing Authority of the City of Charleston Charleston, SC 

Insulation Contractor: Gale Insulation Ladson, SC 

Product Application: Silver Shield™ installed as radiant barrier. Total of 250,000sf to be installed.

Completion Date: June 2012

The Problem

Needed to improve energy efficiency of existing homes to help low-income residents lower cost of their utility bills.

Silver Shield Attic Hybrid System
Project Information:

Developer: Real Places, LLC, Asheville, NC

Builder: G.N. Arly & Co, LLC, Asheville, NC

Insulation Contractor: Allied Insulation, Asheville, NC

Product Application: Cathedral Ceiling Insulation Design; Closed Cell R-6.0 SPF + R-19 Fiberglass unfaced batt + Silver Shield™ radiant barrier/reflective insulation

Completion Date: June 2010

The Problem

Requirement for the HVAC equipment to be in a conditioned air-sealed environment; meet the building code requirement for Energy Efficiency and Safety for Spray Foam Insulation;
and to cover the exposed Fiberglass.

Silver Shield in attic
Project Information:

Builder/Developer: Holiday Builders, Melbourne, FL 

Insulation Contractor: Gale Insulation, Fort Pierce, FL 

Application: Silver Shield as attic radiant barrier [3,000sf installed] 

Completion Date: April 2010 

Attic Silver Shield
Project Information:

Builder/Developer: Sonnum LLC, Nashville, TN

Insulation Contractor: Dale Insulation, Nashville, TN

Application: Flash & FOIL installed on walls, knee walls, and cathedral ceilings in a 7,800 sq. ft.
single-family home.

Silver Shield Reflective Insulation
Project Information:

Owner/Developer: Epoch Properties, Winter Park, FL 

Insulation Contractor: Brant & Son, Inc., Orlando, FL 

Product Application: Silver Shield installed as Attic Radiant Barrier (11,500sf total) 

Completion Date: September 2009

hy-fi hybrid insulation kazcor project
Project Information:

Project Location: Whiteright, TX

Contractor/Builder: Pat Kazcor 

Size of Building: 2,800 sq. ft.

Date Completed: August 2015

hy-fi hybrid insulation vogul construction
Project Information:

Project Location: Leander, TX

Contractor: TruTeam (Austin, TX) | Sales Representative - Todd Spivey

Builder: Vogel Builders (www.vogelbuilders.net)

Size of Building: 3,800 sq. ft. 

Date Completed: August 2015

HY-Fi hybrid insulation VA
Project Information:

Project Location: Virginia Beach, VA

Insulation Contractor: Quality Building Products (Masco Contractor Services) 905 Executive Court, Chesapeake, VA 23320

Size of Building: 10 - 3,000 sq. ft. two story duplexes

Date Completed: September 2014

HY-Fi insulation used in Texas
Project Information:

Project Location: Dallas, TX

Insulation Contractor: CLS Insulation, IBP 2915 East Randall Mills Road, Arlington, TX 76011

Size of Building: 4,000 sq. ft. 

Date Completed: August 2014

Zylstra Harley Davidson
Project Information:

Project Location: Ames, IA

Insulation Contractor: Walker Spray Foam

21327 Quinlan Ave.
Dallas Center, IA 50063

Size of Building: 6,000 Sq. ft

Date Completed: April 2014

When we got a call from Zylstra Harley Davidson in Dallas Center, Iowa, requesting more information about HY-Fi, our revolutionary hybrid insulation system, we knew this would be the perfect application for HY-Fi.

The issue Zylstra Harley Davidison was having was the cost to insulate a large commercial showroom to R-21 specifications. Enter HY-Fi. With only 2" of closed cell foam blown in the wall cavaties, they quickly installed a layer of R-8 HY-Fi directly onto the studs that allowed them to reach R-21 at a lower cost than what SPF alone would have cost.

In addition to reducing heat flow by radiation, HY-Fi’s multiple layers also reduced convective heat transfer. Combining HY-Fi’s superior radiation protection with traditional insulation in a hybrid system created superior resistance to heat transfer that allowed Zystra to efficienctly control the temperature within their showroom. 

Hy-Fi in Custom Home
Project Information:

Builder/Developer: Robert Lord Builders, Inc., St. Charles, IL 

Insulation Contractor: Builders’ Insulation, Seffner, FL 

Application: VR Plus Shield™ Hi-Perm Version [2,875sf installed], plus BASF Spray-tite #178 (R-6.9 per inch). Total living space is: 3,200sf. 

Completion Date: April 2010

Flash and Foil Application
Project Information:

Builder/Developer: Sonnum LLC, Nashville, TN

Insulation Contractor: Dale Insulation, Nashville, TN

Application: Flash & FOIL installed on walls, knee walls, and cathedral ceilings in a 7,800 sq. ft.
single-family home.

Go Green Home Insulation
Project Information:

Builder - Go Green Construction Inc. 
Installer - Go Green Construction Inc. 

Flash & FOIL® Hybrid System 

Fi-Foil Product - VR Plus Shield Hi-Perm Version 

Sprayfoam - NCFI® R-6.7 per inch 

Framing - 2” x 4” spaced 24” on center 

House - 3 Story / 4,300 SQFT 

6,000 SQFT of Flash & FOIL® installed

fifoil fsk shield insulation product
Project Information:

Project Location: Lake Wales, FL

Insulation Contractor: SEMCO Construction, Inc. Bartow, FL 33830

FSK Shield Ceiling Application on Winter Haven High School
Project Information:

Owner/Developer: Polk County Public Schools, Bartow, FL 

Construction Manager: M.M. Parrish Construction Co., Winter Haven, FL 

Insulation Contractor: Acoustical Services, Inc., Eaton Park, FL (Lakeland) 

Product Application: FSK Shield™ Class A Insulation Facing; installed approximately 45,000sf Total. 

Completion Date: August 2011

The Problem

Commercial building code requires Class A rated facing on insulation installed above suspended ceilings.

FSK Shield Reflective Insulation
Project Information:

Owner/Developer: Polk County Public Schools, Bartow, FL 

Construction Manager: Marcobay Construction, Lakeland, FL 

Insulation Contractor: Combee Insulation, Lakeland, FL (100,000sf) 

Product Application: FSK Shield™ Class A Insulation Facing 

Completion Date: December 2010 (started January 2010)

The Problem

Commercial building code requires Class A rated facing on insulation installed above uspended ceilings.

FSK Shield with wood frame
Project Information:

Builder/Developer: Cornerstone Custom Construction, Heathrow, FL 

Insulation Contractor: 31-W Insulation, Inc., Orlando, FL 

Product Application: FSK Shield™ Class A Insulation Facing (600sf) 

Completion Date: December 2010

The Problem

Unframed barrier walls that needed a Class A fire-rated material, which spray foam could adhere to, and that could span large areas without stretching 

FSK project
Project Information:

Owner/Developer: Polk County School Board, Bartow, FL

Construction Manager: Henkelman Construction, Inc., Lakeland, FL

Architect: Furr & Wegman Architects, Lakeland, FL

Insulation Contractor: Combee Insulation Co., Inc., Lakeland, FL

Application: FSK Shield™ installed as Insulation Facing for unfaced batt throughout the school building.

[Approximately 35,000sf installed]

Completion Date: July 2009

FSK Shield Reflective Insulation
Project Information:

Polk County Public Schools, Bartow, Florida needed a way to meet Florida Building Codes and install the batt insulation above their drop-in acoustical ceiling tiles, so it would be easier to repair and replace ceiling tiles, work on lighting and electrical issues, etc., without disturbing the thermal barrier. So they contacted their local acoustical ceiling and insulation contractor - Mark DiOrazio at Acoustical Services, Lakeland, FL, and their various design professionals to research their options. In addition, they knew that the batt insulation installed above their ceiling tile had to have a Class A Facing to meet code requirements.

FSK Shield Reflective Insulation
Project Information:

Owner/Developer: Garden Fresh Restaurant Corp., San Diego, CA

Product Application: FSK Shield™ installed as insulation facing for unfaced batt. Draped over the rafters and left exposed, in both the entrance lobby and above the 55-ft long salad bars.

Completion Date: October 2006

7,000 Sq Ft

Retro Shield System in Hook Tire Building
Project Information:

Distributor: Service Partners 

Insulation Contractor: Gale Contractor Services Piedmont, SC 29673 

Product Application: RetroShield® System (6,000 sq. ft.) 

The Problem

The original metal building insulation was cracked, split open and yellow with age.

Retro Shield in Gymnasium
Project Information:

Owner: BOYS & GIRLS CLUB, Washington, DC 

Insulation Contractor: Cary Quality Insulation & Building Products, Fredericksburg, VA 

Product Application: RetroShield® System [26,000sf installed] 

The Problem

The existing ceiling and wall insulation in their gym was separating at seams, breaking down and in need of repair.

RetroShield®: Reflective Insulation System for Retrofitting Existing Metal Buildings
Project Information:

Owner: ASTRO PAK®, Costa Mesa, CA 

Insulation Contractor: Tidewater Insulators, Norfolk, VA 

Product Application: RetroShield® System [18,000sf installed] 

Completion Date: November 2011

The Problem

Wanted to create a cleaner, more sanitary warehouse environment.

Retro Shield on metal ceiling
Project Information:

Owner: Insight Auctioneers, Sebring, FL 

Insulation Contractor: Central Florida Insulation Inc., Sebring, FL 

Product Application: RetroShield® System [4,000sf installed] 

Completion Date: January 2011

The Problem

Insight Auctioneers built a new office/warehouse and they wanted a metal building insulation that would not absorb moisture, while keeping their building cooler in the hot Florida summer.

Retro Shield Application
Project Information:

Owner: Highland County State Fairgrounds, Sebring, FL 

Insulation Contractor: West Coast Insulation Inc., Sebring, FL 

Product Application: RetroShield® System (17,000 sq. ft.) 

Completion Date: March 2011

The Problem

The 20-year fairgrounds’ arena was showing it’s age, with vinyl faced insulation seams separating and sections falling down and needed a face-lift.

Polk County Retro Shield
Project Information:

Owner: Polk County Sheriff’s Department, Lakeland, FL 

Insulation Contractor: Combee Insulation, Lakeland, FL 

Product Application: RetroShield® System [4,000sf installed] 

Completion Date: June 2000

The Problem

Building was very hot and loud during rain storms, and 3” faced fiberglass metal building insulation was torn and falling down.

Retro Shield in Excel Energy
Project Information:

General Contractor: Family Home & Building Corp, Pueblo, CO

Insulation Contractor: Powers Thermal Insulation, Colorado Springs, CO

Application: RetroShield® System [6,300sf installed]

Completion Date: May 2010

The Problem

Improve the energy efficiency of their building and reduce operating costs.

Fi-Foil Retro Shield System Project
Project Information:

Owner: JPB, Inc., Holiday, FL

Insulation Contractor: Gale Insulation, Brooksville, FL

Product Application: RetroShield® System [6,880sf installed]

Completion Date: July 2010

The Problem

Converting this warehouse space in a metal building to a comfortable office environment,
required increased Energy Efficiency through added insulation.

Retro Shield System
Project Information:

Owner/Developer: The Ruthvens, Lakeland, FL

Insulation Contractor: Davidson Insulation & Acoustics, Lakeland, FL

Product Application: RetroShield® System [5,600sf installed]

Completion Date: May 2010

The Problem

The Ruthvens, a commercial developer, were looking for a way to make their warehouse buildings more en-ergy efficient by adding insulation, as well as, cleaning up the appearance of the existing warehouse units. With these upgrades they felt they could lease or sell these units more easily.

Retro Shield System in Gymnasium
Project Information:

General Contractor: Barton Marrow Company, Alpharetta, GA

Insulation Contractor: Wilson Insulation, Decatur, GA

Product Application: RetroShield® System [9,000sf installed]

Completion Date: July 2010

The Problem

Druids Hills United Methodist Church and the Atlanta School Board share this space at 1200 Ponce de Leon Avenue NE, Atlanta, GA, and needed an insulation solution that would cover up the existing vinyl faced batt insulation that was deteriorating and falling down.

Retro Shield System
Project Information:

General Contractor: Legacy Construction Services, Memphis, TN

Insulation Contractor: Integrity Energy Solutions, Greenville, SC

Product Application: RetroShield® System

Project Size: 25,000 square feet

Completion Date: July 2010

The Problem: 

Legacy Construction Services, Memphis, TN is in charge of renovations to improve energy efficiency and the appearance of the Cummins MidSouth region facilities.

before Retro Shield
Project Information:

Owner: Fastenal Company

Insulation Contractor: Standard Insulation (Charlotte, NC)

Product Application: RBI Shield Reflective Insulation attached with Fi-Foil’s patented Clip & Pin Components to metal purlins.

Completion Date: March 2009

Building Size: 4,500 Sq Ft

Retro Shield System
Project Information:

Iron Works Fitness, a 20,000 square foot fitness club located in Hueytown, Alabama, wanted to find a lower cost way to keep their customers cool as they worked out. According to the owner, Terry Brasseale, he was specifically looking for an affordable and efficient way to reduce his air conditioning costs. That’s when he heard about Fi-Foil’s RetroShield® System – an exclusive system that includes RBI Shield™ Ultra (reflective bubble insulation) and Clip & Pin components providing superior thermal performance and ease of installation; specifically designed for retrofitting and upgrading insulation systems in existing metal buildings.

Silver Shield Radiant Barrier Project Profile
Project Information:

Owner: Housing Authority of the City of Charleston Charleston, SC 

Insulation Contractor: Gale Insulation Ladson, SC 

Product Application: Silver Shield™ installed as radiant barrier. Total of 250,000sf to be installed.

Completion Date: June 2012

The Problem

Needed to improve energy efficiency of existing homes to help low-income residents lower cost of their utility bills.

Silver Shield Attic Hybrid System
Project Information:

Developer: Real Places, LLC, Asheville, NC

Builder: G.N. Arly & Co, LLC, Asheville, NC

Insulation Contractor: Allied Insulation, Asheville, NC

Product Application: Cathedral Ceiling Insulation Design; Closed Cell R-6.0 SPF + R-19 Fiberglass unfaced batt + Silver Shield™ radiant barrier/reflective insulation

Completion Date: June 2010

The Problem

Requirement for the HVAC equipment to be in a conditioned air-sealed environment; meet the building code requirement for Energy Efficiency and Safety for Spray Foam Insulation;
and to cover the exposed Fiberglass.

Silver Shield in attic
Project Information:

Builder/Developer: Holiday Builders, Melbourne, FL 

Insulation Contractor: Gale Insulation, Fort Pierce, FL 

Application: Silver Shield as attic radiant barrier [3,000sf installed] 

Completion Date: April 2010 

Attic Silver Shield
Project Information:

Builder/Developer: Sonnum LLC, Nashville, TN

Insulation Contractor: Dale Insulation, Nashville, TN

Application: Flash & FOIL installed on walls, knee walls, and cathedral ceilings in a 7,800 sq. ft.
single-family home.

Silver Shield Reflective Insulation
Project Information:

Owner/Developer: Epoch Properties, Winter Park, FL 

Insulation Contractor: Brant & Son, Inc., Orlando, FL 

Product Application: Silver Shield installed as Attic Radiant Barrier (11,500sf total) 

Completion Date: September 2009

M Shield on Masonry Home
Project Information:

Home Builder: David Weekly Homes, Tampa, FL 

Insulation Contractor: Daniel Insulation, Clearwater, FL 

Product Application: M-Shield Reflective Insulation (2,000sf) 

Completion Date: January 2011

The Problem

Daniel Insulation was asked to provide a masonry wall insulation system, to help David Weekley Homes meet their Energy Star certification requirements for higher R-Values.

VR Plus Shield Masonry Wall Insulation
Project Information:

Owner-Builder/Developer: Pinnacle Housing Group Inc., Miami, FL 

General Contractor: Pinnacle Housing Group, Inc., Miami, FL 

Insulation Contractor: Gale Insulation, Miami Gardens, FL 

Product Application: VR Plus Shield™ installed as exterior mass wall insulation, over 1-1/2” wood furring. (142,840sf) 

Completion Date: September 2011

The Problem

Required a high-quality and affordably priced masonry wall insulation for their apartment homes.

M Shield on Masonry
Project Information:

Builder/Developer: Hulbert Homes, Inc., Lakeland, FL 

Insulation Contractor: Combee Insulation, Lakeland, FL 

Product Application: M-Shield™ Reflective Insulation (2,500sf installed) 

Completion Date: August 2010

The Problem

Mark Hulbert wanted a masonry wall insulation that would help him certify his Homes as a “Florida Green Building Coalition (FGBC) green certified” home and a certified “Energy Star®” rated home under both energy efficiency and indoor environmental quality categories.

M-Shield
Project Information:

Builder/Developer: Alvarez Homes, Tampa, FL

Insulation Contractor: Daniel Insulation, Clearwater, FL

Application: M-Shield™ Reflective Insulation installed as an exterior masonry wall insulation. [Total Living Space = 4,000sf]

Completion Date: September 2009

Go Green Home
Project Information:

Builder/Developer: Hickman Homes, Lakeland, FL

Insulation Contractor: Davidson Insulation & Acoustics, Inc., Lakeland, FL

Application: M-Shield™ Reflective Insulation installed as an exterior masonry wall insulation.

[Total Living Space = 2,000sf]

Completion Date: August 2009

M-Shield Josh Wynne
Project Information:

Builder: Josh Wynne Construction, Sarasota, FL

Insulation Contractor: EcoTechnologies, Inc., Sarasota, FL

Application: M-Shield Reflective Insulation as Masonry Wall Insulation.

[2,229sf home]

Completion Date: March 2009

M-Shield
Project Information:

Project: Custom Home Install

Builder/Contractor: Jonas Yoder Custom Homes

Architect: Palmquist Associates P.A

Insulation Company: Fi-Foil Company, Inc.

Insulation Distributor: Miller Insulation

Location: Sarasota, Florida

Radiant Shield Application
Project Information:

Builder/Developer: Hulbert Homes, Inc., Lakeland, FL 

Insulation Contractor: Combee Insulation, Lakeland, FL 

Product Application: Radiant Shield™ Hi-Perm (1,000sf installed) 

Completion Date: August 2010

The Problem

Needed an insulation facing for their knee wall, that could hold the batt insulation in place until the drywall was installed.

GFP Project
Project Information:

Building Owner: New York Power Authority 

General Contractor: Scully Construction 

Application: GFP (Gas Filled Panel) Insulation system installed on exterior walls behind steam ra-diators and in plenum section above drop-ceiling. 

Completion Date: 5th Floor September 2009; 13 Floors Total 

Remainder of Building: 2011 

FSK Shield Reflective Insulation
Project Information:

Polk County Public Schools, Bartow, Florida needed a way to meet Florida Building Codes and install the batt insulation above their drop-in acoustical ceiling tiles, so it would be easier to repair and replace ceiling tiles, work on lighting and electrical issues, etc., without disturbing the thermal barrier. So they contacted their local acoustical ceiling and insulation contractor - Mark DiOrazio at Acoustical Services, Lakeland, FL, and their various design professionals to research their options. In addition, they knew that the batt insulation installed above their ceiling tile had to have a Class A Facing to meet code requirements.

What Our Clients Are Saying

You could walk from one end of the scaffolding to the other end and notice a considerable difference. There was at least a 20% difference between the cavities that were insulated versus the cavities that had not been installed with the RetroShield® System.

Contractor, Combee Insulation, Lakeland, FL

The Company We Keep

NAHB logo
ICAA logo
RIMA-I
International Association of Plumbing and Mechanical Officials
Spray Polyurethane Form Alliance
Florida Green Building Coalition
South Face